Code128BarcodeShape Properties

The Code128BarcodeShape type exposes the following members.

Properties
  NameDescription
Public propertyBlendMode
The blend mode used by this shape. (default is BlendMode.Inherit)
(Inherited from ContentShape.)
Public propertyCharacterSet
The character set this Code 128 barcode will use. (default=B)
Public propertyData
The data that is represented by this barcode.
(Inherited from BarcodeShape.)
Public propertyDataLength
Maximum length of data. Default: 12.
(Inherited from BarcodeShape.)
Public propertyDisplay
The textual representation of the data as it appears with the barcode.
(Overrides BarcodeShapeDisplay.)
Public propertyDock
How this shape is docked.
(Inherited from Shape.)
Public propertyGS1Compatible
Whether this barcode is GS1-128 compatibly (default false).
Public propertyHeight
The actual height of the barcode. If set to 0 (default), the minimum height will be used.
(Inherited from BarcodeShape.)
Public propertyID
This Identifier (ID) can be used to track which shape raise an exception.
(Inherited from Shape.)
Public propertyLocation
If, and how the textual respresentation of the data is displayed. Default: None.
(Inherited from BarcodeShape.)
Public propertyMargin
Get or set the margin of a shape.
(Inherited from Shape.)
Public propertyMinimumHeight
The effective height (in points) of the barcode given the current settings.
(Overrides BarcodeShapeMinimumHeight.)
Public propertyMinimumWidth
The effective width (in points) of the barcode given the current settings. Includes the quite zone.
(Overrides BarcodeShapeMinimumWidth.)
Public propertyOpacity
The opacity (0...255) which must be used for this shape. Default is 255 (fully opaque).
(Inherited from ContentShape.)
Public propertyQuiteZone
The effective width of the quite zone in points. The quite zone is the empty space at both the left and right side of the bar code. Property Width includes the quite zone.
Public propertyRenderingIntent
Gets or sets the rendering intent (default is RenderingIntent.RelativeColorimetric).
(Inherited from ContentShape.)
Public propertyTransform
Apply this transformation to the content shape before rendering.
(Inherited from ContentShape.)
Public propertyUseQuietZone
Add a quiet zone to the left and to the right of the barcode. Default: false.
(Inherited from BarcodeShape.)
Public propertyWidth
The actual width of the barcode. If set to 0 (default), the minimum width will be used.
(Inherited from BarcodeShape.)
Public propertyX
X-position of the lower-left corner, center or start point (depending on shape type).
(Inherited from ContentShape.)
Public propertyXDimension
The x-dimension (narrowest element of a bar code symbol) in mils. 1 mil = 0.001 inch. E.g. A 7.5 mil x-dimension means that the most narrow bar code element measures 0.0075 inches. Default: 13.5.
(Inherited from BarcodeShape.)
Public propertyY
Y-position of the lower-left corner, center or start point (depending on shape type).
(Inherited from ContentShape.)
Top
See Also